Happy Easter - Peeking Baby Bunny (Created by Lisa Z.)

Hello High Hopes Fans!!!

 

Happy Easter Weekend Friends! For today's post, I have a cute baby bunny card to share with you...

 

This is Peeking Baby Bunny (L123).  What a wonderful little bunny to use on a birthday, baby or Easter card!

 

I started by colouring the image with Tombow Markers and water. After the image was all coloured and dry, I trimmed the main image to a smaller size to fit this card.

 

The pattern paper is from Pink Paislee-Pen Pals 6x6 Paper Pad, along with some SU Barely Banana cardstock for the card base.  A white satin ribbon was added behind the main image.  To complete this card, Prima paper flowers were used to cover the edges of the bunny image, along with dots of Liquid Pearls added to the centres of each flower for some added shimmer and dimension.

 

Supplies Used:

Ink - Tombow Markers - 977, 969, N15, 565, 228 and 723.  Versamark Ink Pad and Black Embossing Powder.
 

Paper - Pink Paislee-Pen Pals 6x6 Paper Pad and SU Barely Banana Cardstock.
 

Misc -  Prima-Paper Flowers, Liquid Pearls-white opal & buttercup, Offray-white satin ribbon, Water Brush and Glue Dots.

 

Thanks for stopping by! And I hope you all have a safe and happy holiday!

***********

Happy Easter - Bunny with Tulip (Created by Jane Z.)

Hello High Hopes Fans!!!

Happy Easter Weekend!  I hope everyone has a safe and happy holiday! 

After the ice storm here in Southern Ontario yesterday, many of us can't wait for the tulips to appear soon....
 

 

This is Bunny with Tulip (T064) along with the sentiment Happy Easter.  Such a cute image!

 

I started by colouring the image with Tombow Markers and water. After the image was all coloured and dry, I applied some Glossy Accents to the tulip and bunny's nose. A Zig-Wink of Stella glitter violet marker was used to add some sparkle to the purple hearts on the flower pot.

 

The main image was cut using a Spellbinders Circle Die and layered with the next size larger circle die cut.  For the card base, I used a piece of SU Elegant Eggplant cardstock.  The designer paper is from Wild Rose Studio-Bella 6x6 paper pad.  The image was adhered to the card using foam tape for some added dimension.  For the sentiment, it was stamped with a Versamark Ink Pad and SU Melon Mambo Embossing Powder was applied then heated.  To complete this card, a few YNS Gumdrops - Bubblegum were added, along with a Glitter Butterfly wired embellishment that I had kicking around in my stash.  

 

Supplies Used:

***Note: If you are in need of any products used here, please send Lora at OCS an email and I'm sure she would be happy to get the item(s) you are looking for.

 

Ink - Tombow Markers - 723, 761, 126, 133, 249, 991, 055, 947, 603, 606, N65 and N95. Versamark Ink Pad, SU Melon Mambo and Black Embossing Powder.

 

Paper - Wild Rose Studio-Bella 6x6 Paper Pad; SU Elegant Eggplant & White Cardstock.

 

Misc - 2 Generators (to deal with our ice storm-related power outage), Glossy Accents, Spellbinders-Circle Dies, Zig-Wink of Stella Glitter Violet marker, YNS Gumdrops-Bubblegum, Glitter Butterfly wired embellishment (Dollar Store), White Gel Pen, Water Brush, Foam Tape and Glue Dots.
 

Thanks for stopping by!  And I hope the Easter Bunny is good to you all!!!
 

 ***********

Blowin' Buddy Bear (Created by Lisa Z.)

Hello High Hopes Fans!!!

 

Happy Saturday Friends! For today's post, I have a cute birthday card to share with you...

 

 

This is Blowin' Buddy Bear (P143) and Wooden Happy Birthday (H060) Sentiment.  What a wonderful little bear to use on a birthday card!

 

I started by colouring the image with Tombow Markers and water. After the image was all coloured and dry, I fussy cut the bear out leaving a small white border around him.

 

The pattern paper is from Carta Bella-Soak Up the Sun 6x6 Paper Pad, along with some SU black cardstock.  The sentiment was stamped with a versamark ink pad then heat embossed using white embossing powder.  Both the image and sentiment were adhered to the card using foam tape to add some dimension.  A SU pretty in pink grosgrain ribbon was added to separate the pattern papers used and a small bow was placed on the sentiment.  To complete this card, three YNS Gumdrops from the Love Me Some Latte pack were included on the bottom right corner of the card.   This was such a fun and easy card to make!  

Supplies Used:

Ink - Tombow Markers - 977, N15, 761, 491, 526, 195 and 743.  Versamark Ink Pad, White and Black Embossing Powder.
 

Paper - Carta Bella-Soak Up the Sun 6x6 Paper Pad and SU Black Cardstock.
 

Misc -  SU-Pretty in Pink Grosgrain Ribbon, YNS Gumdrops - Love Me Some Latte, Water Brush, Foam Tape and Glue Dots.

 

Thanks for stopping by!

***********

Ironing Irma (Created by Jane Z.)

Hello High Hopes Fans!!!

TGIF!!!  Well another week has come and gone, and I am back to share another card with you...
 

 

This is Ironing Irma (T085) along with the sentiment called - Lg. Fancy Happy Mother's Day (J044).  Such an adorable image!

 

I started by colouring the image with Tombow Markers and water. After the image was all coloured and dry, I applied some Glossy Accents to the flower on Irma's apron and the heart on her dress. 

 

The main image was cut using a Spellbinders Scalloped Rectangle Die.  For the card base, I used a piece of SU Marina Mist cardstock.  The designer paper is from Doodlebug-Sunkissed 6x6 paper pad.  The sentiment was stamped with a Versamark Ink Pad and White Embossing Powder was applied then heated.  To complete this card, a few YNS Gumdrops - White Sugar were added.  

 

Supplies Used:

***Note: If you are in need of any products used here, please send Lora at OCS an email and I'm sure she would be happy to get the item(s) you are looking for.

 

Ink - Tombow Markers - 491, N60, N65, N75, N55, 977, 452, 847, 055, 942, 850, 126, 133 and 856. Versamark Ink Pad, White and Black Embossing Powder.

 

Paper - Doodlebug-Sunkissed 6x6 Paper Pad; SU Marina Mist & White Cardstock.

 

Misc - Glossy Accents, Spellbinders-Scalloped Rectangle Die, YNS Gumdrops-White Sugar, Water Brush, and Glue Dots.
 

Thanks for stopping by!
 

 ***********

Party Girl Florence (Created by Lisa Z.)

Hello High Hopes Fans!!!

 

Happy Saturday! Here's a card that should make you chuckle some...What a fabulous and fun image to create a birthday card with! 

 

 

This is Party Girl Florence (S098) and Lg. Fancy Happy Birthday (H037) Sentiment. 

 

I started by colouring the image with Tombow Markers and water. After the image was all coloured and dry, I applied some Zig-Wink of Stella Clear Glitter pen on the party hat, noise maker and necklace for a touch of sparkle.  Unfortunately, it is a bit difficult to see in this picture.  

 

The pattern paper is from Carta Bella-It's A Celebration 6x6 Paper Pad, along with some SU Not Quite Navy and White cardstock.  The image was cut down to an appropriate size, then a layered piece of cardstock was offset.  The sentiment was stamped with a versamark ink pad then heat embossed using black embossing powder.  Both the image and sentiment was adhered to the card base using foam tape to add some dimension.  To complete this card, a couple of lines of dots were added above and below the sentiment with Mint Green Liquid Pearls.  Also, a couple of YNS Gumdrops that were also Mint Green were included in the top left corner of the image.  I am not sure why the gumdrops appear to be off colour in this picture, but in real life they do match quite nicely.  This was such a fun card to make!  

Supplies Used:

Ink - Tombow Markers - 055, 723, 761, 528, 243 and N95.  Versamark Ink Pad and Black Embossing Powder.
 

Paper - Carta Bella-It's A Celebration 6x6 Paper Pad; SU Not Quite Navy and White Cardstock.
 

Misc - Liquid Pearls - Mint Green, YNS Gumdrops-Mint Green, Zig-Wink of Stella Clear Glitter Pen, Water Brush, Foam Tape and Glue Dots.

 

Thanks for stopping by!

***********

Birthday Buzzard Stand-Up Card (Created by Jane Z.)

Hello High Hopes Fans!!!

 

I have been wanting to use these stamps for quite some time now, and finally here it is!  Isn't this buzzard just the sweetest one ever?!?!?! 

 

A view with the card standing up...

 

This is Birthday Buzzard (T061), along with part of the sentiment called - Swinging Birthday (H191) and Ya Old Buzzard Sentiment (F350).  Such a super fun image to colour!

 

I started by colouring the image with Tombow Markers and water. After the image was all coloured and dry, I applied some Glossy Accents to the balloons and some X-mas Red Stickles to the buzzard's party hat. 

 

The main image was cut using a Spellbinders Circle Die.  For the card base, a Sizzix Circle Stand-Up Die was used on some SU Pacific Point cardstock.  SU Pacific Point ink was sponged around the edges of the image.  The designer paper is from Echo Park - Birthday Wishes (Boy) 6x6 paper pad, along with SU Pacific Point and White Cardstock.  The sentiments were stamped with a Versamark Ink Pad and White Embossing Powder was applied then heated.  To complete this card, a few SU Candy Dots - Brights Pack were added.  

 

Supplies Used:

***Note: If you are in need of any products used here, please send Lora at OCS an email and I'm sure she would be happy to get the item(s) you are looking for.

 

Ink - Tombow Markers - 491, N60, 912, 933, 946, N35, N55, N75, 969, 977, 126, 133, 249, 856, 847, 476 and 535. Versamark Ink Pad, SU Pacific Point Ink Pad for sponging, White and Black Embossing Powder.

 

Paper - Echo Park - Birthday Wishes (Boy) 6x6 Paper Pad; SU Pacific Point & White Cardstock.

 

Misc - Glossy Accents, Sizzix Circle Stand-Up Die, Spellbinders-Circle Die, X-mas Red Stickles, SU Candy Dots-Brights Pack, Sponge Dauber, Water Brush, and Glue Dots.
 

Thanks for stopping by!
 

 ***********

Party Dragon (Created by Lisa Z.)

Hello High Hopes Fans!!!

 

Happy Saturday! For a fun birthday card, I just adore this image...

 

 

This is Party Dragon (Q134).  Don't you just love this little dragon? 

 

I started by colouring the image with Tombow Markers and water. After the image was all coloured and dry, I applied Glossy Accents on the balloons for some dimension.  

 

The pattern paper is from Bo Bunny - Our Little Monster 6x6 Paper Pad, along with some SU Cherry Cobbler and White cardstock.  The image was cut down to an appropriate size, then a small SU corner punch was used to add the decorative corners.  The sentiment was from some old rub-ons I had kicking around in my stash.  To complete this card, a strip of ribbon with a bow tied on was fastened down.  This was such a fun card to make!  

Supplies Used:

Ink - Tombow Markers - 055, 977, 847, 443, 126 and N95.  Versamark Ink Pad and Black Embossing Powder.
 

Paper - Bo Bunny - Our Little Monster 6x6 Paper Pad; SU Cherry Cobbler and White Cardstock.
 

Misc - Glossy Accents, SU Real Red Grosgrain Stitched Ribbon, SU Corner Punch, Deja Views Rub-Ons, Water Brush, and Glue Dots.

 

Thanks for stopping by!

***********

Dragon Hop (Created by Jane Z.)

Hello High Hopes Fans!!!

 

It's finally Friday! Whooo hooo!  Now that we are into March, Easter is coming up quickly.  It falls a little earlier on the calendar this year, so don't delay on those Easter cards or projects you need! Hopefully, today's card inspires you to do so...

 

This is Dragon Hop (Q103).  I think this image is sooo adorable!!! And super easy to colour too!

 

I started by colouring the image with Tombow Markers and water. After the image was all coloured and dry, I applied some Glossy Accents to the Easter Eggs in the basket and to the Dragon's horns. 

 

The main image was cut using a die called MFT-Cross Stitch Rectangle.  Some SU Chocolate Chip cardstock was cut slightly larger than the main image (for layering).  Chocolate Chip ink was sponged around the edges of the image then offset using the layered piece of SU cardstock.  The designer paper is from Echo Park - Spring 6x6 paper pad, along with SU Chocolate Chip and White Cardstock.  The sentiment was stamped with a Versamark Ink Pad and Brown Embossing Powder was applied then heated.  To complete this card, a couple of YNS Gumdrops-Love Me Some Latte and 3 brown Prima Flowers with clear rhinestones adhered in the centres were added.  

 

Supplies Used:

***Note: If you are in need of any products used here, please send Lora at OCS an email and I'm sure she would be happy to get the item(s) you are looking for.

 

Ink - Tombow Markers - 491, N60, 723, N75, 969, 947, 126, 133, 856, 055, 623 and 553. Versamark Ink Pad, Brown and Black Embossing Powder.

 

Paper - Echo Park - Spring 6x6 Paper Pad; SU Chocolate Chip & White Cardstock.

 

Misc - Glossy Accents, MFT- Cross-Stitch Rectangle Die Set, YNS Gumdrops-Love Me Some Latte, Prima Flowers, Clear Rhinestones, Sponge Dauber, Water Brush, and Glue Dots.
 

Thanks for stopping by!
 

 ***********